The D-Net Control Panel - Samsung LN2A620A1F User Manual

The D-Net control panel

Select an IEEE1394 device from the D-Net device list. The TV will then display the D-Net control panel.
This panel allows you to use the TV remote control to control the selected IEEE1394 device.
1.
Press the MENU button to display the menu. Press the ▲ or ▼ button to
select "Application", then press the ENTER
2.
Press the ▲ or ▼ button to select "D-NET", then press the ENTER
button.
3.
Press the ▲ or ▼ button to select a D-Net (IEEE1394) connected device.
Press the ENTER
The D-Net control panel appears on the bottom of the screen.
➣
4.
Use the ◄ or ► button on the remote control to move through the options
(see next page) available in the D-Net control panel.
5.
Press the ENTER
6.
To view the IEEE1394 device in FULL SCREEN, press the EXIT button.
For information about how to use the icons, refer to the following page.
➣
What is D-Net Mode?
➣
D-Net Mode refers to selecting any device from the D-Net device list except
for DTV itself (it also refers to selecting another DTV connected with an IEEE
1394 cable.) In this mode, the DTV displays video from the connected device.
button.
button.
button to select an option.
English - 77
WISELINK
Anynet+ (HDMI-CEC)
D-NET ►