New Features Explanation; To Directly Connect To Tv; To Connect To Home Theater - Samsung HPT5054X/XAA Service Manual

Product Specification

New Features explanation

# #
- Anynet+ : Anynet+ is an AV network system that enables you to control all connected Samsung AV devices with your
Samsung TV's remote.

To directly connect to TV

HDMI 1.3 Cable

To connect to Home Theater

Optical Cable
Connect the Optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio Input on the Home
Theater.
Connect only one Home Theater.
You can listen to 5.1 channel sound through the home theater's speakers. Otherwise, you can only listen to 2 channel
stereo sound in other cases. Make sure to connect the Digital Audio IN (Optical) of the home theater and the TV
correctly to listen to TV sound through the home theater. However, you cannot listen to sound from the BD recorder
that is sent to the home theater via the TV in 5.1 channel sound because the TV outputs only 2 channel stereo sound.
Please see the manual for the home theater.
You can connect an Anynet + device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet + functions.
Anynet + works when the AV device supporting Anynet + is in the Standby or On status.
Anynet + supports up to 12 AV devices in total.
2-2
TV
Anynet + Device 1
HDMI 1.3 Cable
HDMI 1.3 Cable
TV
Anynet + Device 1
HDMI 1.3 Cable
Home Theater
HDMI 1.3 Cable
Anynet + Device 2 Anynet + Device 3
Anynet + Device 2
HDMI 1.3 Cable
Anynet + Device 3
HDMI 1.3 Cable
Connect the [HDMI 1], [HDMI 2]
or [HDMI 3] jack on the TV
and the HDMI OUT jack of the
corresponding Anynet + device
using the HDMI cable.
1. Connect the [HDMI 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet +
device using the HDMI
cable.
2. Connect the HDMI IN jack
of the home theater and
the HDMI OUT jack of the
corresponding Anynet +
device using the HDMI
cable.
Samsung Electronics