Switching Your Television On And Off; Viewing The Menus - Samsung BN68-01783B-00 User Manual

Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as shown in the
figure.
2 Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
Using the remote control with the ON/OFF( ) light button set to
On will reduce the battery usage time.
3 Close the cover as shown in the figure.
Remove the batteries and store them in a cool and dry place if you
won't be using the remote control for a long time. The remote control
can be used up to about 23 feet from the TV. (Assuming typical TV
usage, the batteries last for about one year.)
If the remote control doesn't work! Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?

Switching Your Television On and Off

The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2 Press the (Power) button (On/Off) on the front of the television or press the POWER button on
the remote control to switch the television on. The channel that you were watching last is re-selected
automatically. If you have not yet stored any channels, no clear picture appears. Refer to "Storing
Channels Automatically" on page 14 or "Storing Channels Manually" on pages 15~16.
If the television is initially powered on, several basic customer settings proceed automatically.
Refer to "Plug & Play Feature" on pages 10~11.
3 To switch the television off, press the
the POWER button on the remote control.
4 To switch the TV on, press the
button or number buttons on the remote control.

Viewing the Menus

1 Press the MENU button.
The main menu is displayed on the screen.
Its left side has six icons: Picture, Sound, Channel,
Setup, Input, and Application
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon's sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the RETURN button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
(Power) button (On/Off) on the front of the television or press
(Power) button (On/Off) on the front of the TV or press the POWER
English - 9
Mode : Standard
Cell Light : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Detailed Settings