Connecting A Vcr - Samsung BN68-01917B-00 User Manual

Using an HDMI Cable
❑
1. Connect an HDMI Cable between the HDMI IN (1, 2(DVI), 3, or 4) jack on the TV and the HDMI jack on the camcorder.
Camcorder
Each Camcorder has a different back panel configuration.
N

Connecting a VCR

Video Connection
❑
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the
instructions on pages 10~11). Skip step 1 if you have not yet connected to an antenna or a cable system.
1. Unplug the cable or antenna from the back of the TV.
. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.
. Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.
4. Connect a Video Cable between the AV IN 1 [Y/VIDEO] or AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the
VCR.
5. Connect Audio Cables between the AV IN 1 (or AV IN 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the VCR
VCR Rear Panel

If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the
N
TV. Alternatively, connect the cable to the "R" jack.
If your VCR is stereo, you must connect two cables.
Each VCR has a different back panel configuration.
N
When connecting a VCR, match the color of the connection terminal to the cable.
N
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
N
1 HDMI Cable (Not supplied)
TV Rear Panel
5 Audio Cable(Not supplied)
4 Video Cable(Not supplied)
 Antenna cable(Not supplied)
English - 14
TV Rear Panel
or
TV Side Panel
TV Side Panel