How To Use// Ru-G3Th/G3Tb - JTS RU-901G3 Instruction Manual

6-2 How to use// RU-G3TH/G3TB

Push and hold the SET button for 2 seconds to enter the setting mode, and
push the▲/▼button to select different parameters. Push the SET button
again to save and exit the setting mode.
◎ FREQ: frequency setting
In 1MHz
In 0.025MHz
◎ Group / channel
G: group Select default group 1~6
CH: channel Select default channel, 1~23
maxSelect default channel,
1~23 max
◎ Microphone input sensitivity
Normal GAIN：+15dB
sensitivity
GAIN：+14dB
GAIN：
GAIN：+2dB
GAIN：+1dB
GAIN：0dB
GAIN：-1dB
GAIN：-2dB
GAIN：
GAIN：-14dB
GAIN：-15dB
◎ ATT microphone audio input attenuation
Att oFF No attenuation at audio input
Att on 20dB attenuation at audio input
Only for RU-G3TB
23
WIRELESS MICROPHONE SYSTEM
Select frequency with ▲/▼
Select frequency with ▲/▼
(default)
Select the number of frequency
first in MHz and then in 0.025MHz.
Select the number for group and
then the number for channel.
It shows the sensitivity is now at GAIN
0dB (default setting).
It shows the audio input
attenuation at 20dB.