Table of Contents
Advertisement
E-MSM720 Initial Configuration
Perform Initial Configuration
Wa r n i n g
3-2
b. A security certificate warning may be displayed the first time you
connect to the management tool. This is normal. Select whatever
option is needed in your Web browser to continue to the management
tool.
c.
On the Login page, enter admin for Username and admin for Pass-
word and then select Login.
d. On the HP End User License Agreement page, read the agreement and
then select Accept HP End User License Agreement.
e.
On the product registration page it is recommended that you register
your product now by selecting Register Now. If the E-MSM720 is not
connected to the Internet prefer not to register now, select Register
Later. Registration is available at anytime by selecting Maintenance
> Registration.
f.
In some regions, a Country prompt appears. Choose the country in
which this product will be used and select Save.
To maintain regulatory compliance, the country must be set accu-
rately to the country in which the E-MSM720 will operate.
g.
At the Administrator password prompt it is recommended that you
change the password. Select Save to save the new password or
Cancel if you choose to keep the default password.
5.
Follow the Basic controller setup Workflow
a.
It is recommended that you next follow the Basic controller setup
workflow. This workflow is selected by default. Click Start to launch
this workflow. If you choose to run no workflows at this time, select
any menu to exit the workflow page.
b. The Basic controller setup workflow provides instructions and
prompts you for options. Read the instructions and respond to the
prompts as desired, selecting Next to get to the next workflow page.
Hide quick links:
Advertisement
Table of Contents
