Service/account setting function
Set the services, account, and security password for a C intelligent function module.
By restricting the services and setting an account, unauthorized access from other users can be prevented.
Security password is required to change the service and account settings.
Window
[Tool] [Module Tool List] [Information Module] [Service/account setting]
Displayed items
Item
Service Settings
Telnet
FTP
WDB
DHCP
MELSEC iQ-R series data link
function
Memory card access
Memory card script execution
Security password
Password Setting
settings
Account setting
Login Name
Password Setting
*1 If the password setting is not entered (blank), it does not change from the current password.
Usable character string for password setting
The following table shows the usable characters in the password setting.
Item
Description
Character
ASCII character string (Alphanumeric characters and special characters)
Usable special characters for password setting is as follows.
• `, ~, !, @, #, $, %, ^, &, *, (, ), _, +, -, =, {, }, |, \, :, ", ;, ', <, >, ?, ,, ., /, [, ], space
*1 The password is case-sensitive.
*2 Special characters (|, ,, space) cannot be used in the password setting of the account settings.
Description
A service to use a Telnet.
A service to use an FTP.
A service to connect CW Workbench.
A service to use a function which assigns the network
settings automatically.
A service to use MELSEC iQ-R series data link functions.
A service to access the memory card.
A service to use the script file stored in the memory card.
*1
Set a security password.
Set the account log in name.
*1
Set the account password.
*1
*2
Setting Range
• Enable
• Disable
(Default: Enable)
8 to 16 characters
(Default: password)
1 to 12 characters (single byte
alphanumeric characters)
(Default: target)
8 to 32 characters
(Default: password)
1 FUNCTION
1.4 Security Function
1
33