Download Print this page

Upgrading The Firmware Flash Memory; System Requirements; Installing The Dvd-Rom Drive - Samsung DVD-ROM drive User Manual

Dvd-rom drive

Advertisement

Your DVD-ROM Drive
COMPACT
1
2
3
1. Connector for stereo headphones with a 3.6 mm stereo mini-jack
2. Headphone volume control
3. Indicator light (when it is green, a disc is being read or recorded)
4. Disc compartment (the compartment opens and closes automatically
when you press the Eject button)
5. Emergency eject hole (if the compartment does not open when you
press the Eject button, power off the computer, insert a pin or unfolded
paper clip in the hole and push firmly)
6. Eject button
1
2
3
4
1. Two-pin digital audio output terminal for use with a sound or MPEG
card supporting digital audio features
2. Four-pin sound output terminal for use with a sound card (refer to the
sound card documentation for further details)
3. Master/slave select terminal
4. Forty-pin host IDE interface connector
5. Four-pin power terminal
2
4
5 6
5

Upgrading the Firmware Flash Memory

The product firmware can be upgraded by downloading the updated file from the
following Web site:
http://www.samsungelectronics.com

System Requirements

Before you install the DVD-ROM drive, we strongly recommend that you
check that your setup meets the system requirements listed below.
Item
Description
Computer
Intel Pentium II (or higher), 32 MB of RAM (or higher)
with an IDE interface
Free expansion unit
5.25 inch
Disk space
100 MB minimum
Windows version
Windows 95/98 OSR2 or Windows NT 4.0 (or higher)
Playback of DVD Video
PC with Window95 OSR2
DVD-Video playback software or appropriate hardware
(MPEG2 card etc.)

Installing the DVD-ROM Drive

To install your DVD-ROM drive in the PC, proceed as follows.
1
Make sure that the PC is powered off and disconnected from any power source.
2
If necessary, attach a horizontal bracket to both sides of the drive.
Use of the brackets depends on your computer
model; you can purchase these accessories
separately from your computer dealer.
3
Remove the cover from a free expansion slot and
install the DVD-ROM drive, as shown in the illustration.
If you have no free expansion slot, install the
drive in place of the diskette drive.
DVD-ROM drive
3

Advertisement

loading

This manual is also suitable for:

Sd-612sSd-610Sd-612Sd-610s