Specifications - Sony STR-DN1030 Reference Manual

On cleaning
Clean the cabinet, panel, and controls with a
soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent,
such as alcohol or benzine.
If you have any questions or problems
concerning your receiver, please consult your
nearest Sony dealer.

Specifications

Amplifier section
1)
Europe model
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
Surround Mode Output Power
(8 ohms, 1 kHz, THD 10%)
1)
Measured under the following conditions:
Power requirements: 230 V AC, 50 Hz
2)
Reference power output for front, center,
surround, surround back and front high speakers.
Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
Analog
Input
Analog
Digital (Coaxial) Impedance: 75 ohms
Digital (Optical) S/N: 100 dB
Output (Analog)
AUDIO OUT
SUBWOOFER
GB
6
105 W + 105 W
2)
150 W per channel
10 Hz – 100 kHz,
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Sensitivity: 500 mV/
50 kilohms
3)
S/N : 96 dB
4)
(A, 500 mV )
S/N: 100 dB
(A, 20 kHz LPF)
(A, 20 kHz LPF)
Voltage: 500 mV/1 kilohm
Voltage: 2 V/1 kilohm
Equalizer
Gain levels
3)
INPUT SHORT (with sound field and equalizer
bypassed).
4)
Weighted network, input level.
FM tuner section
Tuning range
Antenna (aerial)
Antenna (aerial) terminals
AM tuner section
Tuning range
Antenna (aerial)
Video section
Inputs/Outputs
Video:
COMPONENT VIDEO:
±10 dB, 1 dB step
87.5 MHz – 108.0 MHz
(50 kHz step)
FM wire antenna (aerial)
75 ohms, unbalanced
531 kHz – 1,602 kHz
(9 kHz step)
Loop antenna (aerial)
1 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
P : 0.7 Vp-p, 75 ohms
B
P : 0.7 Vp-p, 75 ohms
R
80 MHz HD Pass Through