Rear Panel - Samsung DVD-P560 User Manual

Rear Panel

1. SCART JACK
- Connect to a TV scart input jack.
2. DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to
connect to a compatible Dolby Digital receiver.
- Use either an optical or coaxial digital cable to
connect to an A/V Amplifier that contains a
Dolby Digital, MPEG2 or DTS decoder.
3. AUDIO OUT JACKS
Connect to the Audio input jacks of your televi-
sion or audio/video receiver.
4. VIDEO OUT JACK
- Use a video cable to connect to the Video
input jack on your television.
- The Video Output in Setup Menu must be set
to Component(I-SCAN) or S-VIDEO.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in
the TV's menu system.
- If Component (P-SCAN) Video Output is selected in Setup Menu, S-Video will not work.
- See pages 27 ~ 28 to get more information on how to use the setup menu.
1
2
2
5. S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to
the S-Video jack on your television for higher
picture quality.
- The Video Output in Setup Menu must be set
to COMPOSITE/S-VIDEO.
6. COMPONENT VIDEO OUT
JACKS
- Use these jacks if you have a TV with
Component Video in jacks. These jacks pro-
vide P , P and Y video.
R B
- If Component(P-SCAN) Video Output is select-
ed in Setup Menu, progressive scan mode will
work.
- If Component(I-SCAN) Video Output is select-
ed in Setup Menu, interlaced scan mode will
work.
6
3 4 5
7