Park; Unpark; Figure 3-7 Park Call Screen; Figure 3-8 Unpark Call Screen - NEC SL1100 Manual

SL1100
___________________________________________________________________________________
1.8
1.9
___________________________________________________________________________________
Desktop Suite

Park

The Park button will transfer the active call to a specific park orbit. When this
function is selected, the following dialog will be displayed (refer to
Park Call Screen).
The spinner control allows the user to select the destination Park orbit.

With Desktop Applications users can park calls in the next available park

orbit by choosing orbit 0 when program 20-11-27 is set to 1 (on).
Selecting the Start button will place the active call in the selected Park

orbit.
The Parked Call shows up in the active call list as a blue Parked Call.

Selecting the Cancel button will close the Park Call dialog without initiating

a call park operation.
If the Park operation fails because the selected Park orbit is not available,

an error message will be displayed.

Unpark

The Unpark button will retrieve a call from a specific park orbit. When this
function is selected, the following dialog in
be displayed.

Figure 3-7 Park Call Screen

Figure 3-8 Unpark Call

Figure 3-8 Unpark Call Screen

Issue 1.0
Figure 3-7
Screen, will
3 - 7