Installation Room Unit Hcw 80 - Honeywell HCW 80 Installation And Operation Manual

a. Burner (direct control)
c. Zone valve
e. Thermal actuator
g. Electric actuator
Fig. 6: Wiring schemes
Fig. 7: Closing the terminal and housing cover
b. Combi boiler
d. Electric heater
f. Zone valve
h. Cooling device
3.2.

Installation room unit HCW 80

WARNING Insufficient data transfer!
Interference of the radio receiver in the
device through metallic objects or
further radio devices.
Ensure there is sufficient distance to
►
metallic objects.
Mount the device with a distance of at
►
least 1 m to radio devices such as
radio headphones, cordless phones
according to the DECT standard, etc.
Select another installation site if the
►
radio interference cannot be rectified.
Fig. 8: Positioning the room unit HCW 80
Place the room unit HCW 80 at the installation site, but do
►
not install it yet.
Remove the housing cover of the room unit HCW 80
►
(see Fig. 9
).
2
1
Fig. 9: Removing the housing cover
Insert the supplied AA batteries with the correct battery
►
polarity (see Fig. 10).
Fig. 10: Battery polarity and send button
Installation
Red LED
Send button
5