Conference Calls
Joining and Splitting a Call
With calls on source and destination, press Join/Split.
ä
...or select Call > Join/Split. The CIX Attendant creates a three-way conference.
ä
To add another destination party to the conference with the Attendant
1. While in a conference ("conferenced" shows on-screen), dial the extension to
add, press Release (Enter).
2. After the dialed party answers, press Join/Split (End). The CIX Attendant joins
the active call and the consultation call. Up to eight parties can be conferenced.
...or select Call > Join > Join/Split.
ä
To split a three-way conference call
Press Join/Split. This applies to three-way conference only.
ä
...or select Call > Join/Split.
ä
To release the last party from a conferencing call
ä
Select Call > Release Last Party.
Switching Between Source and Destination Parties
Note You can switch between Source and Destination parties (swap) when two calls
are conferenced together with the Attendant.
To switch to the source party, press Source (Delete)
ä
...or select Call > Source.
ä
To switch to the destination party, press Destination (Page Down)
...or click on the Destination icon.
Note If the Attendant leaves the conference the first station assumes control of the
conference.
Strata CIX Attendant Console
12/06
Call Processing
Conference Calls
23