Choosing A Connection - Samsung DVD-C631P Owner's Manual

Choosing a Connection

The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before
you connect or disconnect any cables.
• Refer to the owner's manual of the additional components you are
connecting for more information on those particular components.
Connection to an Audio System
Method 1
AUDIO
SYSTEM
2ch Amplifier
Audio Input Jacks
DVD
PLAYER
Analog Audio Out
14
Method 2
Dolby Digital Decoder
Digital Audio Input Jack
OR
Digital Audio Out
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Method 1
Good
Basic Audio picture
TV
S-Video
AV Cable
OR
DVD
PLAYER
Audio Output Jacks Video Output Jack S-Video Jack
DVD Player + TV with Video Input Jack
Method 1
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
DVD Player + TV with S-Video Input Jack
Method 2
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
DVD Player + TV with Component Video Jacks
Method 3
(The VIDEO OUT SELECT switch must be set to the 525i(480i) position.)
DVD Player + TV with Progressive Scan Jacks.
Method 4
(The VIDEO OUT SELECT switch must be set to the 525P(480P) position).
• If 525P(480P) VIDEO OUT is selected, VIDEO and S-VIDEO will not work.
• Depending on your TV, your hookup for Method 4 may differ from the illustration.
NOTE
Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual's instructions regarding Progressive
Scan settings in the TV's menu system.
Choosing a Connection
Method 2 Method 3 Method 4
Better Best Optimum
picture picture picture
Video
Cable Cables
OR
525P 525P
(480P) (480P)
525I 525I
(480I) (480I)
S-VIDEO S-VIDEO
Component Video Jacks Component Video Jacks
525P
(480P)
525I
(480I)
S-VIDEO
15