CONNECTING TO AN AUDIO SYSTEM
(DOLBY DIGITAL, DTS AMPLIFIER)
1.
Using the optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the
Blu-ray Disc Player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier.
2.
Using the video signal cable(s), connect the HDMI , COMPONENT or VIDEO OUT terminals on the rear of the
Blu-ray Disc Player to the HDMI, COMPONENT or VIDEO IN terminals of your TV as described on pages 20 to
24.
3.
Turn on the Blu-ray Disc Player, TV, and Amplifier.
4.
Press the input select button of the Amplifier to select the external input in order to hear sound from
the Blu-ray Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
1
A
M
`
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
`
Please set the audio in the menu screen according to the Amplifier. (See pages 35~36)
`
The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your Amplifier.
`
When using this connection, discs with LPCM audio soundtracks will only be heard over the front two
channels.
English _