After Use; Cleaning And Replacing The Motor Protection Filter; Replacing Hepa-Filter - Fakir nilco S 20 E Operating Instructions Manual

en
Cleaning and replacing
the motor protection filter
Exhaust air filter
Replacing the HEPA-Filter
16

After use

● Place the motor head upside down on a table (preferably
on something soft).
● Remove the motor protection filter and wash it in warm
soapy water, then let it dry completely.
● Insert the cleaned motor protection filter or a new one.

NOTICE!
Clean the washable motor protection filter regularly. Re-
place after about 5 dust bags or as necessary.
● Remove the Motorhead.
● Pull out the filter frame.
● For cleaning of the exhaust air filter remove it upwards
from the frame, wash it in warm, soapy water, then let it
dry completely.
● Insert the clean and dry / new exhaust air filter and slide
the filter frame back precisely into the motor head.

NOTICE!
Clean the washable exhaust air filter regularly. Replace af-
ter about 5 dust bags or as necessary.
This high performance filter traps the finest particles almost
entirely. It should always be used when vacuum cleaning
must be carried out to clemanding standards of hygiene and
room air purity. (Optional in 36 20 003, 26 29 003,
26 35 003, 26 37 003) in 36 19 003, 26 36 003
accessories
accessories in 36 35 003 HEPA-Filter - Ref.-No. 36 35 870
● Remove the Motorhead. Pull out the HEPA-Filter and re-
place it with a new one.
= igh
HEPA H
Change the HEPA-Filter after approx. 6 month or in case
it is extremly dirty
HEPA-Filter - Ref.-No. 26 30 870
fficiency articulate
E P
ir filter
A