Display/ Information button (
You can check the recording status in the LCD.
Pressing the Display/ Information button will change
the display as shown below.
Some information will not display in the AUTO, MOVIE CLIP
and SCENE mode.
[ Normal display ]
[ Current and last shot comparison ]
Histogram shows you the distribution of brightness in
recorded images. If the bars in the histogram are higher
towards the right, the image may be too bright.
If the bars are higher on the left, the image may be too
dark. If the lighting conditions are too bright to check
the subject by using the LCD, checking the histogram will
enable more precise exposure control for the shots.
Current and last shot comparison
The last captured image displays on the left side of the LCD and the pre-view image displays
on the right side of the LCD. You can compare the two images to take next shot.
Information displayed on the Finder LCD is the same as the information on the Rear LCD.
64
Pressing
the (
)
button
[ Image only ]
Pressing
the (
)
button
[ Grid mark ]
Pressing
the (
)
button
[ Image & Full information ]
Pressing
the (
)
button
[ Histogram ]
Distribution of brightness
Dark
)
Bright