Siemens MJ-XL Installation And Operation Manual page 2

Hazardous voltage and high-speed moving parts.
Will cause death, serious personal injury, or equipment damage.
Aways de-energize and ground equipment before maintenance.
Read and understand this instruction manual before using
equipment. Maintenance should be performed only by qualified
personnel. The use of unauthorized parts in the repair of the
equipment or tampering by unqualified personnel wil result in
dangerous conditions that will cause severe personal injury or
equipment damage. Follow all safety instructions contained
herein.
The information contained herein is general in nature and not intended for specific
application purposes. It does not relieve the user of responsibility to use sound prac-
tices in application, installation, operation, and maintenance of the equipment pur-
chased. Siemens reserves the right to make changes at any time without notice of
obligations. Should a conflict arise between the general information contained in this
publication and the contents of drawings or supplementary material, or both, the latter
shall take precedence.
For the purposes of this manual, a qualified person is one who is familiar with the
installation, construction, or operation of the equipment and the hazards involved. In
addition, this person has the following qualifications:
(a) is trained and authorized to de-energize, clear, ground, and tag circuits and
equipment in accordance with established safety practices.
(b) is trained in the proper care and use of protective equipment such as rubber
gloves, hard hat, safety glasses or face shields, flash clothing, etc., in accor-
dance with established safety procedures.
(c) is trained in rendering first aid.
These instructions do not purport to cover all details or variations in equipment, not to
provide for every possible contingency to be met in connection with installation, opera-
tion, or maintenance. Should further information be desired or should particular prob-
lems arise which are not covered sufficiently for the purchaser' s purposes, the matter
should be referred to the local sales office.
The contents of the instruction manual shall not become part of or modify any prior or
existing agreement, commitment or relationship. The sales contract contains the entire
obligation of Siemens Power Transmission & Distribution, Inc. The warranty contained
in the contract between parties is the sole warranty of Siemens Power Transmission &
Distribution, Inc. Any statements contained herein do not create new warranties or
modify the existing warranty.
DANGER
IMPORTANT
QUALIFIED PERSON
NOTE