Plug & Play Feature
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1
If the television is in Standby mode, press the POWER (
on the remote control.
2
To start the Plug & Play, select the Start and press the ENTER
button.
Result:
The available languages are listed.
3
Select the appropriate language by pressing the ... or † button.
Press the ENTER button to confirm your choice.
Result:
The message Check antenna input is displayed.
4
Make sure that the antenna is connected to the TV, and then
press the ENTER button.
Result:
The available areas are listed.
5
Select the appropriate area by pressing the ... or † button.
Press the ENTER button to confirm your choice.
Result:
The Auto Store menu is displayed.
6
Press the ENTER button to start the search
Result:
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
➢
To stop the search before it has finished or return to normal
viewing, press the EXIT or ENTER button.
7
When the channels have been stored, the Clock Set menu is
displayed. Press the ENTER button to set the current time.
Press the œ or √ button to move to the hour or minute.
Set these by pressing the ... or † button.
Press the ENTER button to confirm your choice.
8
When it has finished, the message Enjoy your watching is
displayed, and then the channel which has been stored will be
activated.
) button
Language
Move
Area
Move
Auto Store
Auto Store
Clock Set
Plug & Play
Start Plug & Play
Start
Enter
Return
Plug & Play
Enter
Skip
Plug & Play
Check antenna input.
OK
Enter
Skip
Plug & Play
Austria
Belgium
Croatia
Denmark
Finland
France
Germany
Enter
Skip
Plug & Play
Start
Enter
Skip
Plug & Play
175 MHz
18%
Stop
Enter
Skip
Plug & Play
: - - : - -
Enter
Skip
Enjoy your watching.
OK
English - 13