Samsung DynaFlat TXN2668WHF Owner's Instructions Manual page 13

Y N
O U R
Remote Control
¿ TV/Component
Press to switch the TV, COMPO-
NENT1, 2, or DIGITAL mode.
Note: The DIGITAL mode does
work in TXN2798HF/
TXN3098WHF/ TXN3298HF models.
¸ DNIe
(TXN3298HF/TXN3098WHF/
TXN2798HF)
Activates DNIe (Digital Natural
Image engine).
˛ VCR Controls
REW (Rewind)
Press to rewind a tape in your
VCR.
STOP
Press this button to stop a tape
during play, record, rewind or
fast forward. If the button is
pressed during Full-Automatic
play, the function will be can-
celled.
PLAY/PAUSE
Press the PLAY/PAUSE button to
play back prerecorded tapes or
pause the tape.
FF
Press to fast forward the tape in
your VCR.
◊ SET
Use this button when you are set-
ting up your remote control to
operate your Set Top Box, VCR,
Cable box, or DVD.
T V
E W
± STILL (Main picture)
Press to stop the action during a
particular scene. Press again to
resume normal video.
Note: The still function doesn't
operate in Component 1, 2 mode.
≠ PIP Controls
(TXN3298HF/TXN3098WHF/
TXN2798HF)
PIP ON
Press this button to control the PIP
window.
SIZE
Press to make the PIP window
small, large, double screen or
stock ticker window.
SWAP
Exchanges the video signal that is
currently displayed on the main
screen with the signal in the PIP
window.
CH
Displays the available channels in
sequence (These buttons change
channels in the PIP window only).
– Reset
If your remote control is not func-
tioning properly, take out the bat-
teries and press the reset button
for about 2~3 seconds. Re-insert
the batteries and try using the
remote control again.
13