FX2N-64DP-M Profibus-DP Master Block
Figure 2.6: Profibus Connection
FX
-64DP-M Profibus-DP
2N
Master Block
2.2.3
Terminating Resistor
The units at each end of the Profibus-DP network must have a terminating resistor. This will
either be in the master or slave unit or in the Profibus connector.
However, the 64DP-M does not have a terminating resistance built-in.
Shielded twisted-pair cable of
Profibus-DP network
Wiring and Mounting 2
2-7