1. Manuals
  2. Brands
  3. Axis Manuals
  4. Security System
  5. T8343
  6. User manual

Axis T8343 User Manual

Hide thumbs Also See for T8343:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
AXIS T8343 Alert Button

User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T8343 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Axis T8343

Summary of Contents for Axis T8343

  • Page 1: User Manual

    AXIS T8343 Alert Button User Manual...
  • Page 2 The device is Z-Wave® enabled and fully compatible with any Z-Wave enabled network. The device can be set up in a Z-Wave network to communicate directly with other end devices such as lighting controllers, or to report directly to a Z-Wave controller like the AXIS M5065 PTZ Network Camera.
  • Page 3 AXIS T8343 Alert Button Solution overview Solution overview...
  • Page 4 AXIS T8343 Alert Button Product overview Product overview...

  • Page 5: How To Add A Device To A Z-Wave Network

    Gateway after about 2 minutes. After that, it will only send data once the button is pressed How to program the Z-Wave device Note Programming Z-Wave devices using a Z-Wave controller, like the AXIS M5065 PTZ Network Camera, is recommended for experienced users only.
  • Page 6 AXIS T8343 Alert Button How to add a device to a Z-Wave Network Z-Wave Group The detector supports either one of two Z-Wave Association Groups: Group 1: Association with 1 Controller node. Group 2: Association with 4 nodes (i.e. end devices such as smart plugs and other lighting controllers). This allows the detector to transfer commands directly to end devices without the participation of the controller.
  • Page 7 AXIS T8343 Alert Button How to add a device to a Z-Wave Network The power is applied for the 0x08 0x01 null first time 0x08 The battery is Low 0x0A null Battery Description Battery Report (value) 0x64 Battery is high...

  • Page 8: Troubleshooting

    AXIS T8343 Alert Button Troubleshooting Troubleshooting Description LED indication Action/Status No node ID. The Z-Wave controller could not find the device and did not provide a node ID. 2-second on, 2-second off for 2 minutes. Factory Reset 1. Press the tamper switch 3 times within 1.5 seconds to put the unit into exclusion mode.

  • Page 9: Specifications

    AXIS T8343 Alert Button Specifications Specifications To find the latest version of the product’s datasheet, go to the product page on axis.com and locate Support & Documentation. Specifications Battery AAA Battery x2 Battery Life 1 year* Range Up to 100 meters line of sight Frequency Range 908.42 MHz, 922.5MHz...
  • Page 10 User Manual Ver. M1.3 AXIS T8343 Alert Button Date: October 2017 © Axis Communications AB, 2017 Part No. T10117077...

Table of Contents