Memorizing The Channels - Samsung CL-29Z40DS, CL-32Z40DS, CL-32Z30DS Owner's Instructions Manual

Samsung colour television owner's instructions
Table of Contents

Advertisement

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (air) and cable channels.
After the available channels are memorized, use the CH
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the
TV (i.e. an air or a cable system).
Channel
Antenna
: Air
Auto Program
Channel Manager
Name
Fine Tune
Signal Strength
Move
Enter
Channel
Antenna
: Air
Auto Program
Channel Manager
Name
Fine Tune
Signal Strength
Move
Enter
Storing Channels in Memory (Automatic Method)
Channel
Antenna
: Air
Auto Program
Channel Manager
Name
Fine Tune
Signal Strength
Move
Enter
Auto Program
Select the antennas to memorize.
Air
Cable
Air + Cable
Move
Enter
Auto Program
Select the cable system.
Analog
STD
HRC
IRC
Move
Enter
Auto Program
Auto Program in progress.
Stop
Enter
1. Press the MENU button to display the menu.
Press the ... or † button to select "Channel", then press the ENTER button.
Return
2. Press the ENTER button select "Antenna".
Press the ... or † button to select "Air" or "Cable", then press the ENTER
Air
button.
Cable
Press the EXIT button to exit.
Return
1. Press the MENU button to display the menu.
Press the ... or † button to select "Channel", then press the ENTER button.
2. Press the ... or † button to select "Auto Program", then press the ENTER
button.
Return
3. Press the ... or † button to select the antenna connection, then press the
ENTER button.
Air: "Air" antenna signal.
Start
Cable: "Cable" antenna signal.
Start
Air+Cable: "Air" and "Cable" antenna signals.
Start
If the antenna is connected to ANT 1 IN (AIR), select "Air" and if it is connected to ANT
2 IN (CABLE), select "Cable".
If both ANT 1 IN and ANT 2 IN are connected, select the "Air + Cable".
If you selected "Air", then go to step
Return
4. Select the correct signal source (STD, HRC, and IRC) by pressing the œ button,
then press the ... or † button.
Press the √ button to select "Start", then press the ENTER button.
Start
STD, HRC, and IRC identify various types of cable TV systems. Contact your local
cable company to identify the type of cable system that exists in your particular area. At
this point the signal source has been selected.
Return
5. After all the available channels are stored, the "Auto Program" menu reappears.
Press the EXIT button to exit.
Air 16
15%
Return
You can also press the
Auto Program menu.
or CH
button to scan through the channels.
5
AUTO PROG.
English-17
.
button on the remote control to bring up the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents