P E R AT I O N
Using the Channel Buttons
Press the CH
button to change channels.
When you press CH
see all the channels that the TV has memorized. (The TV must have memorized
at least three channels.) You will not see channels that were either erased or not
Directly Accessing Channels
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel 27, press "2," then "7."
The TV will change channels when you press the
When you use the number buttons, you can directly select channels that were
either erased or not memorized.
To select a channel over 100, press the +100 button. (For channel 122, press
"+100," then "2," then "2.")
To change to single-digit channels (0–9) faster, press "0" before the
single digit. (For channel "4," press "0," then "4.")
Using the PRE-CH Button to select the Previous Channel
The TV will switch to the last channel viewed.
Adjusting the Volume
Press VOL + or – VOL to increase or decrease the volume.
At any time, you can temporarily cut off the sound using the Mute button.
Press MUTE and the sound cuts off.
The word "Mute" will appear in the lower-left corner of the
To turn mute off, press MUTE again, or simply press either
the VOL – or VOL + button.
, the TV changes channels in sequence. You will
To quickly switch between two
channels that are far apart, tune to
one channel, then use the number
button to select the second channel.
Then, use the PRE-CH button to
quickly alternate between them.
: TV O