O
P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~4
on previous page.
Press MENU, then press
CH
twice to select
"Channel."
Press VOL + to access
the Channel sub-menu.
2
Press CH
to select
"Auto program".
3
Press VOL +.
The TV will begin
memorizing all of the
available channels.
4
After all the available
channels are stored, the
Auto program menu
reappears. Press MENU
twice to exit.
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
Press MENU at any time to interrupt
the memorization process and return
to the Channel menu.
C
T
: TV O
HAPTER
HREE
3.6
PERATION