Motload Command List; Table 3-1. Motload Commands - Motorola MVME6100 Installation And User Manual

■
The argument/option identifier character is always preceded by a hyphen (-) character
■
Options are identified by a single character
■
Option arguments immediately follow (no spaces) the option
■
All commands, command options, and device tree strings are case sensitive
Example:
MVME6100> flashProgram –d/dev/flash0 –n00100000
For more information on MOTLoad operation and function, refer to the MOTLoad Firmware
Package User's Manual.

MOTLoad Command List

The following table provides a list of all current MOTLoad commands. Products supported by
MOTLoad may or may not employ the full command set. Typing help at the MOTLoad command
prompt will display all commands supported by MOTLoad for a given product.

Table 3-1. MOTLoad Commands

Command
as
bcb bch bcw
bdTempShow
bfb bfh bfw
blkCp
blkFmt
blkRd
blkShow
blkVe
blkWr
bmb bmh bmw
br
bsb bsh bsw
bvb bvh bvw
cdDir
cdGet
clear
cm
csb csh csw
devShow
diskBoot
One-Line Instruction Assembler
Block Compare Byte/Halfword/Word
Display Current Board Temperature
Block Fill Byte/Halfword/Word
Block Copy
Block Format
Block Read
Block Show Device Configuration Data
Block Verify
Block Write
Block Move Byte/Halfword/Word
Assign/Delete/Display User-Program Break-Points
Block Search Byte/Halfword/Word
Block Verify Byte/Halfword/Word
ISO9660 File System Directory Listing
ISO9660 File System File Load
Clear the Specified Status/History Table(s)
Turns on Concurrent Mode
Calculates a Checksum Specified by Command-line Options
Display (Show) Device/Node Table
Disk Boot (Direct-Access Mass-Storage Device)
MVME6100 Installation and Use (V6100A/IH2)
Chapter 3 MOTLoad Firmware
Description
19