Download Print this page

Bosch GLM Professional 80 Original Instructions Manual page 10

Hide thumbs Also See for GLM Professional 80:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
OBJ_BUCH-3509-001.book Page 10 Thursday, June 28, 2018 9:49 AM
10 | English
Product Features
The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
1 Display
2 Measuring button
3 Button for grade measurement / calibration **
4 Button for function mode / basic settings **
5 Minus button
6 Button for result / timer function **
7 Button for measured-value list / storage of constant **
8 Button for clearing the internal memory / On/Off **
9 Positioning pin
10 Button for selection of the reference level
11 Plus button
12 Button for length, area and volume measurement
13 Charge socket cover
14 Socket for charge connector
15 Fixture for carrying strap
16 Laser beam outlet
17 Reception lens
18 Serial number
19 1/4" thread
20 Laser warning label
21 Charge connector
22 Micro USB cable
23 Protective pouch
24 Measuring rail*
25 Locking lever for measuring rail*
26 Tripod*
27 Laser viewing glasses*
28 Laser target plate*
* The accessories illustrated or described are not included as
standard delivery.
** Keep button pressed to call up the extended functions.
Display Elements
a Measured-value lines
b "ERROR" indication
c Result line
d Digital vial / position of measured-value list entry
e Measured-value list indicator
f Measuring functions
Length measurement
Area/surface measurement
Volume measurement
Continuous measurement
Indirect Height Measurement
1
1
Double indirect Height Measurement
2
Indirect Length Measurement
1
1 609 92A 4GN | (28.6.18)
Timer Function
Wall-surface measurement
Gradient Measurement
g Battery charge-control indicator
h Laser, switched on
i Measurement reference level
j Temperature warning
Assembly
Battery Charging
The battery can be charged using a USB port. To do so, con-
nect the measuring tool to a USB port using the micro USB ca-
ble. In USB mode (charging mode, data transfer), the charg-
ing time can be noticeably longer.
Recommendations for Optimal Handling of the Battery
Store the battery only when within the allowable temperature
range, see "Technical Data". As an example, do not leave the
battery in a vehicle in summer.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
Observe the notes for disposal.
Operation
Initial Operation
 Protect the measuring tool against moisture and direct
sun light.
 Do not subject the measuring tool to extreme tempera-
tures or variations in temperature. As an example, do
not leave it in vehicles for a long time. In case of large vari-
ations in temperature, allow the measuring tool to adjust to
the ambient temperature before putting it into operation.
In case of extreme temperatures or variations in tempera-
ture, the accuracy of the measuring tool can be impaired.
 Avoid heavy impact to or falling down of the measuring
tool. After severe exterior effects to the measuring tool, it
is recommended to carry out an accuracy check (see "Ac-
curacy Check and Calibration of the Grade Measurement
(Tilt Calibration)" and "Accuracy Check of the Distance
Measurement" on page 15) each time before continuing to
work.
Switching On and Off
 Do not leave the switched-on measuring tool unattend-
ed and switch the measuring tool off after use. Other
persons could be blinded by the laser beam.
For switching on the measuring tool, the following possibili-
ties are given:
– Pressing the On/Off button 8: The measuring tool is
switched on and is in length measurement mode. The laser
is not activated.
Bosch Power Tools

Advertisement

loading

This manual is also suitable for:

Glm professional 80 plus r60