TP-Link TL-WN823N Quick Installation Manual

Quick Installation Guide
300Mbps Mini Wireless N
USB Adapter
MODEL NO. TL-WN823N
1
Connect to a Computer
Insert the adapter into a USB port on your
computer directly.
For Mac OS X
2 3
Install Driver and Utility Join a Wireless Network
a. Download the driver and utility from this Option 1:
product's Support page at
www.tp-link.com.
a. Click
bar.
Note:
If your computer has a CD drive, you can also run the
included CD to install the driver and utility.
b. Select your Wi-Fi network and enter the
Wi-Fi password when prompted.
b. Unzip the downloaded folder and run the
Install.pkg.
c. Follow the instructions to complete the
installation.
SHELL
Install.pkg Uninstall.command
Via TP-Link Utility Option 2: Via Wi-Fi Protected Setup (WPS)
(TP-Link Utility) on the menu a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS
button on the adapter until the WPS
progress window appears.
Fri 5:14 PM
USB-WiFi: On
Turn USB-WiFi Off
TP-Link_XXXX
TP-Link_0903
TP-Link_ 0001
TP-Link_0002
Join Other Network...
WPS...
Open Wireless Utility...
WPS
WPS Progress： Scan Active WPS AP
PIN PBC
c. When the "WPS Protocol Finished!!"
message appears, click OK.
Cancel