Download Print this page

TP-Link TL-R600VPN Quick Installation Manual

Safestream gigabit broadband vpn router
Hide thumbs Also See for TL-R600VPN:

Advertisement

Quick Installation Guide

Gigabit Broadband VPN Router
TL-R600VPN
MODEL NO.
2

Hardware Connection

1
Connect the WAN port of the router to the cable or DSL
modem via Ethernet cable.
Here we take the ADSL modem
from
TP-LINK as an example.
2
Connect a LAN port of the router to the computer by
Ethernet cable.
3
2
7106504437 REV2.0.0

Package Contents

TL-R600VPN
Ethernet Cable
Power Cord
Gigabit Broadband VPN Router
MODEL NO.
TL-R600VPN
Resource CD
QIG
The provided power cord may differ from the figure above
due to local power specifications.
3
Connect one end of the AC power cord to the AC power socket
on the router, and the other end into an electrical outlet. The
router will work automatically and the LED will display as the
LED Descriptions shown.
TL-R600VPN
TD-8816
Internet
1
1

Physical Description

• Front Panel
• Back Panel
• LED Descriptions
Name
Indication
Status
On (Green)
The router is powered on
PWR
The router is powered o
O
Flashing (Green)
The router works properly
SYS
On/O
The router has a hardware error
There is a device linked to the corresponding port but not active (Green light indicates
On
the linked device is running at 1000Mbps, and yellow indicates the linked device is
(Green/Yellow)
running at 10/100Mbps.)
WAN, LAN
The corresponding port is transmitting or receiving data (Green light indicates the
Flashing
linked device is running at 1000Mbps, and yellow indicates the linked device is running
(Green/Yellow)
at 10/100Mbps.)
O
There is no device linked to the corresponding port
3
PC Con guration
1
Click "Start" "Control Panel"
For Windows XP/2000:
"Network
and Internet Connections"
"Network Connections", and
.
then find "Local Area Connection" icon and right click it. Then
click "Properties".
For Windows Vista/7:
Click "Start"
"Control Panel"
"View
network status and tasks".
For Windows Vista
For Windows 7
Click "View Status"
Click "Local Area Connection"
For Windows Vista/7, click "Properties" on the Pop-up after the
steps above.
Select "Internet Protocol (TCP/IP)
"/"
Internet Protocol
2
"
Version 4 (TCP/IPv4)" and click " Properties ".
For Windows XP/2000
For Windows XP/2000
For Windows 7/Vista
3
Select "Obtain an IP address automatically " and "Obtain
server address automatically ". Then click "OK".
DNS
For Windows XP/2000
For Windows 7/Vista

Advertisement

loading

Summary of Contents for TP-Link TL-R600VPN

  • Page 1: Physical Description

    “Local Area Connection” icon and right click it. Then router will work automatically and the LED will display as the from TP-LINK as an example. click “Properties”. LED Descriptions shown. Connect a LAN port of the router to the computer by Ethernet cable.
  • Page 2: Technical Support

    Service Time: Monday to Friday, 09:00 to E-mail: support.ru@tp-link.com 12:30 and 13:30 to 18:00. GMT+1 or GMT+2 Service time: From 9:00 to 21:00 (Moscow time) (DST in Germany) *Except weekends and holidays in RF * Except bank holidays in Hesse www.tp-link.com TP-LINK TECHNOLOGIES CO., LTD.