Samsung SyncMaster 1100MB Manual

Hide thumbs Also See for SyncMaster 1100MB:

Advertisement

SyncMaster 1100MB
Install drivers
Install programs

Advertisement

Table of Contents
loading

Summary of Contents for Samsung SyncMaster 1100MB

  • Page 1 SyncMaster 1100MB Install drivers Install programs...
  • Page 2 Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Do not disassemble Do not touch Power When not used for extended periods of time, set your computer to a screen saver.
  • Page 3 Do not use a damaged or loose plug. This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire.
  • Page 4 Do not drop the monitor when moving it. This may cause damage to the product or human body. Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf.
  • Page 5 Clean When cleaning the monitor case or the surface of the CDT, wipe with a slightly moistened, soft fabric. Do not clean Flat monitor with water. Use a water-diluted mild detergent.
  • Page 6: Service Center

    This may cause an electric shock or fire. Refer servicing to qualified service personnel. If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or This may cause an electric shock or fire.
  • Page 7 Failure to do so may cause an electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the cable.
  • Page 8 Watching the monitor continuously at a too close angle may result in eyesight damage. To ease eye strain, take at least a five-minute break after every hour of using the monitor. Do not install the product on an unstable, uneven surface or a location prone to vibrations.
  • Page 9 Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking Monitor and Stand (Some models include a stand attached.) Manual Warranty Card User's Guide,...
  • Page 10 Front MagicBright™ button (Not available in all locations) D-sub Cable MagicBright™ is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Monitor Driver, Natural Color software, MagicTune™ software BNC Cable (Sold separately)
  • Page 11 Power button [ ] PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. Rear (The configuration at the back of the monitor may vary from product to product.)
  • Page 12 Bottom You can separate the base from the monitor. Tilt/Swivel Base...
  • Page 13 Connecting the Monitor Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Connecting to a computer 2-1. Connect the signal cable to the 15-pin, D-sub connector on the back of your computer.
  • Page 14 2. Align the tabs on the base with the corresponding slots on the bottom of the monitor. 3. Press the base onto the monitor until the tabs are fully engaged in the slots. 4. Push the base toward the front of the monitor until the release latch clicks into the locked position.
  • Page 15 5. Squeeze and pull up on the release latch on the base. 6. Push the base toward the back of the monitor and lift up to remove the base. The base will align with the monitor slots in only one position.
  • Page 16: Windows Xp Operating System

    Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web site : http://www.samsung.com/...
  • Page 17 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next" and then click "Have disk".
  • Page 18 7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button.
  • Page 19: Microsoft ® Windows ® 2000 Operating System

    5. Click "Driver" and then click on "Update Driver.." then click on the "Next" button. 6. Choose "Display a list of the known drivers for this device so that I can choose a specific driver" then click "Next" and then click "Have disk".
  • Page 20 Natural Color Software Program One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor.
  • Page 21 Select [Setting]/[Control Panel] on the [Start] menu and then double-click [Add/Delete a program]. Select Natural Color from the list and then click the [Add/Delete] button.
  • Page 22 2. [Exit ] Use this button to Exit the active menu or the OSD. 3. [ / ] These buttons allow you to highlight and adjust items in the menu. Adjust Brightness and Contrast. 4. [Menu ] Use this button to open the OSD and activate a highlighted menu item.
  • Page 23 Menu MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Text, Internet, Entertain and Custom. Each mode has its own pre-configured brightness value. You can easily select one of four settings by simply pressing the MagicBright™...
  • Page 24 Menu Adjust Brightness and Contrast. OSD Lock/Unlock Menu After pushing the "MENU" button more than 10 seconds, OSD function is OSD Lock/Unlock locked (unlocked). Description Description...
  • Page 25 Select an icon that you want to know from the OSD menu to display a text or animation explanation of that icon. Menu Follow these instructions to change the position of the monitor's entire display. Position Follow these instructions to change the size of the monitor's entire display.
  • Page 26: Sidepin Corner

    Adjust the pincushion setting when the sides of the display are bowed in or bowed out; adjust the trapezoid setting when Pincushion/ the top or bottom of the display is too large or small. Trapezoid Adjust the pinbalance setting when the sides of the display are bowed towards the left or right.
  • Page 27 R,G,B color balance. Standard Red Green Blue (sRGB) is a defined default color space. If a monitor, printer and scanner are all calibrated to the sRGB color characteristics, then you can find color matching from each peripheral. When the monitor is in the sRGB mode, Brightness / Contrast / MagicBright2™...
  • Page 28: Clear Moire

    Menu Description Play/Stop A 'moiré' pattern can appear on your screen, looking like a series of concentric circles or arcs. Clear Moire To eliminate this pattern, use the clear moiré adjustments. Adjust the linearity setting when the display image is compressed at the top or bottom.
  • Page 29 Description Play/Stop The Degauss feature will remove color impurities caused by magnetic fields. Do not use the Degauss feature more than once within a 30- minute period. Degauss Note: The monitor may buzz momentarily, the image colors may change and the image will jiggle for a few seconds.
  • Page 30: Display Timing

    Menu Position The menu will automatically turn off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it Menu Duration turns off. Follow these steps to change the language used in the menu.
  • Page 31: What Is Magictune

    Monitor performance can vary due to the graphics card, host computer lighting conditions and other environmental factors. In order to get the best image on a monitor requires you to adjust it for your unique setting. Unfortunately, the manual controls available to tune the image often prove to be challenging. Proper adjustment (tuning) requires an easy to use program that goes through a step-by-step process to obtain the best overall picture quality.
  • Page 32: Installation

    Insert the installation CD into the CD-ROM drive. Click the MagicTune™ installation file. Select installation Language, Click "Next". When the InstallationShield Wizard window appears, click "Next." Select "I agree to the terms of the license agreement" to accept the terms of use. Uninstall Troubleshooting...
  • Page 33 Choose a folder to install the MagicTune program. Click "Install." The "Installation Status" window appears.
  • Page 34: Installation Problems

    Magictune execution icon may not appear depending on specification of computer system or monitor. If that happens, press F5 Key. Installation Problems The installation of MagicTune™ can be affected by such factors as the video card, motherboard and the network environment. "Troubleshooting"...
  • Page 35 Windows™ 98 SE Windows™ Me Windows™ 2000 Windows™ XP Home Edition Windows™ XP Professional It is recommended using MagicTune in Windows™ 2000 or later. Hardware 32MB Memory above 25MB Hard disk space above website * For more information, visit the MagicTune...
  • Page 36: Osd Mode

    MagicTune control mode will be different according to monitor models. OSD Mode The OSD mode makes the adjustment of settings on all monitors easy. When selected , each tab on top of the control window displays the general descriptions of the sub-menu items for adjustment.
  • Page 37: Color Tab Definition

    Brightness Contrast MagicBright Makes the entire screen brighter or darker. The detailed data of the images in the dark Brightness areas can be lost if the brightness is not adjusted to the proper level. Adjust the brightness for best viewing conditions.
  • Page 38: Image Tab Definition

    The tone of the color can be changed. 5000K - 6500K - 9300K Color Tone Reset Adjusts of the monitor image color. You can change the monitor color to your desired color. Color Control R- G - B sRGB Image Tab Definition...
  • Page 39: Option Tab Definition

    Rotation Adjusts the Pincushion, Pinbalance, Trapezoid and Parallelogram values. Geometry 2 Pincushion Pinbalance Trapezoid Parallelogram Adjusts the Moire, Degauss, Sidepin Corner, and Pinbalance Corner values. Moire Other Degauss Sidepin Corner Top Sidepin Corner Bottom Pinbalance Corner Top Pinbalance Corner Bottom Option Tab Definition You can configure MagicTune using the following options.
  • Page 40: Support Tab Definition

    Select Language - The language chosen affects only the language of the OSD. Support Tab Definition Shows the Asset ID and the version number of the program, and allows you to use the Help feature. Visit the MagicTune website or click to open the Help files (User Manual) if you need any Help help installing or running MagicTune.
  • Page 41 User ID Server IP Department Location Version Displays the version of MagicTune. Shows the user ID that is register in PC. Write down the server IP . Write down the department. Write down the location.
  • Page 42 Windows™ Control Panel. Perform the following steps remove MagicTune. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu. If the program runs on Windows™ XP, go to [Control Panel] in the [Start] menu. Click the "Add or Remove Programs" icon in Control Panel.
  • Page 43: Troubleshooting

    Troubleshooting The current computing system is not compatible with MagicTune. Please press OK and click on the "Shortcut to the MagicTune site" to view our home page for further reference. An error may occur when your video/graphic card is not in the 'Available' list.
  • Page 44 Make sure to turn OFF Highlight before using MagicTune. Troubleshooting MagicTune may not work in case monitor is replaced or driver of graphic card is updated while MagicTune is operating. If so, please restart the system. Symptom...
  • Page 45 Have you changed your PC work properly. or video graphic card? website Visit the MagicTune for technical support for MagicTune, FAQs (questions and answers) and software upgrades. website Visit the MagicTune and download the installation software for MagicTune MAC. the graphic card, visit our website to check the compatible graphic card list provided.
  • Page 46 Check List Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call Information section or contact your Symptom Check List No images on the Is the power cord screen.
  • Page 47 Is the voltage stable? The screen image can also appear to shake or vibrate if there is a problem with the video card or the computer's main board. The screen shows Is the screen...
  • Page 48 2. Check if the computer beeps more than 3 times when booting. (If it does, request an after-service for the main board of the computer.) 3. If you installed a new video card or if you assembled the PC, check if the installed adapter (video) driver and the monitor driver.
  • Page 49: Warning Messages

    This box appears during normal operation if the video cable becomes disconnected or damaged. 4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor. If your monitor screen remains blank after using the previous procedure, check your video controller and computer system;...
  • Page 50: Useful Tips

    If there is no image on the screen or a "Sync. Out of Range, 68.7kHz 168Hz PP" message comes up, disconnect the cable from the computer while the monitor is still powered on. If there is a message coming up on the screen or if the screen goes white, this means the monitor is in working condition.
  • Page 51: Active Display

    50 ~ 160 Hz Input Signal, Terminated RGB Analog 0.7Vp-p ± 5%, Positive bright, 75 Ω ± 5%(terminated), Separate H/V sync, Composite, SOG, TTL level, positive or negative. Input Signal Definition Signal connectors 15-pin 3-row mini D-sub connector, BNC Signal cable...
  • Page 52: Environmental Considerations

    This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
  • Page 53: Vertical Frequency

    2048 x 1536 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit:...
  • Page 54 Service The address and phone number of the company can be changed without previous notice. CANADA : Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada Tel. 1-800-SAMSUNG (7267864) Fax. (905) 542-1199 http://www.samsung.ca MAXICO : Tel.
  • Page 55 BRAZIL : Samsung Electronica da Amazonia Ltda Rua Prof. Manoelito de ornellas 303, Terreo B. Chacara Sto. Antonio, 04719-040 Sao Paulo, SP, Brazil Tel. 0800-124-421 http://www.samsung.com/br CHILE : Samsung Electronics Chile LTDA. Avda. Americo Vespucio Sur 100, Oficina 102 Las Condes, Santiago, Chile Tel.
  • Page 56 Tel. 09 693 79 554 http://www.samsung.com/fi FRANCE : Samsung Service Consommateurs 66 rue des Vanesses BP 50116 - Villepinte -95950 ROISSY cedex France Tel. 08 25 08 65 65 (0,15?min) Fax. '01 48 63 06 38 (0,15?min) http://www.www.samsung.fr GERMANY :...
  • Page 57 NETHERLANDS : Samsung Electronics Benelux BV P.O. Box 681 2600 AR Delft, The Netherlands Tel. 0900 20 200 88 (?0.10/Min) http://www.samsung.nl NORWAY : Tel. 231 627 22 http://www.samsung.com/no POLAND : Tel. 0 801 801 881 Fax. +48-22-607 4448 http://www.samsung.com/pl PORTUGAL : SAMSUNG ELECTRONICA PORTUGUESA, S.A...
  • Page 58 JAPAN : Tel. 0120-327-527 Fax. 81-3-3527-5533 http://www.samsung.com/jp MALAYSIA : Samsung Malaysia Electronics Sdn. Bhd. 3B-1-1. Level 1, Block 3B, Plaza Sentral, Jalan Stesen Sentral 5, KL Sentral , 50470, Kuala Lumpur, Malaysia Tel. 1800-88-9999 Fax. 03-22636759 http://www.samsung.com/my PHILIPPINES : Samsung Electronics Phils. Corp.
  • Page 59 Fax. 009714 8837714 http://www.samsung.com/mea Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot...
  • Page 60 By using the button on the front panel of the monitor, you can easily set one of the 3 brightness and sharpness settings depending on your needs.
  • Page 61 Class B This device is a Class B digital apparatus. For Safety and EMC compliance guide, you may refer to "Regulatory" Guide.
  • Page 62: Correct Disposal Of This Product (Waste Electrical & Electronic Equipment) - Europe Only

    (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To...

Table of Contents