Charge A Flat Battery; Slope Control - Husqvarna AUTOMOWER 550 Operator's Manual

WARNING: Always switch off the robotic
lawnmower using the main switch if it requires
maintenance, or if the robotic lawnmower must
be moved outside the working area.

4.7 Charge a flat battery

When the Husqvarna robotic lawnmower is new or has
been stored for a long period, the battery will be flat and
needs to be charged before starting.
WARNING: Only charge the robotic lawnmower
using a charging station which is intended for it.
Incorrect use may result in electric shock,
overheating or leakage of corrosive liquid from
the battery.
In the event of leakage of electrolyte flush with
water and seek medical help if it comes in
contact with the eyes etc.
1. Set the Main switch to position
2. Place the robotic lawnmower in the charging station.
Slide the robotic lawnmower in as far as possible to
ensure proper contact between the robotic
lawnmower and the charging station. See contact
Product overview on page 6
and charging strips in
3. The dashboard in the Automower
shows that charging is in progress.

4.8 Slope control

In order to reduce lawn wear near boundary wire in
slopes, the robotic lawnmower avoids reversing when
driving downhill. When approaching the boundary wire it
therefore either bounces away or makes a U-turn.
42 - Operation
1 .
®
Connect app
362 - 002 - 06.02.2018