Checking The Installation; Connectivity - Husqvarna AUTOMOWER 550 Operator's Manual

8. Connect the guide wire to the boundary wire using a
coupler:
a) Insert the boundary wire and guide wire in the
coupler. Check that the wires are fully inserted
into the coupler so that the ends are visible
through the transparent area on the other side of
the coupler.
b) Use a multigrip pliers to completely compress
the button on the coupler. It does not matter
which holes are used to connect each wire.
9. Staple down or bury the splice in the lawn.
CAUTION: The guide wire may not cross the
boundary wire, for instance a boundary wire that
is laid out to an island.

3.8 Checking the installation

Check the loop signal by inspecting the indicator lamp
on the charging station.
362 - 002 - 06.02.2018
LED indicator lamp on the charging station on page
See
50 if the lamp does not indicate a solid or flashing
green light.

3.9 Connectivity

®
The Automower Connect app allows you to monitor,
control and configure your robotic lawnmower
conveniently on your mobile device. You will also
receive push notifications from the app, for example if
the robotic lawnmower is stopped.
The app provides two modes of connectivity: Long-
range cellular connectivity and Short-range Bluetooth
®
connectivity. Automower 520 and Automower
support both cellular communication and Bluetooth
Automower
communication. See
21 .
It is also possible to monitor and control your robotic
lawnmower if you are subscribing to Husqvarna Fleet
Husqvarna Fleet Services on page 22 .
Services. See
®
3.9.1 Automower Connect
®
Automower Connect is included in Automower
520/550.
®
Automower Connect brings the mower's menu system
to your mobile device, making it easy to read and
change the mower settings remotely. Through this
application, you can receive the status of your
®
Automower and send commands to the robotic
lawnmower from anywhere in the world. In case of theft,
you will get an alarm and be able to track your
lawnmower's position. Some countries do not support
®
Automower Connect due to region specific cellular
systems. Please, contact your local Husqvarna
representative for more information.
3.9.2 Getting started
Download the Automower ®
or GooglePlay. Once you have downloaded the app, you
can specify an e-mail address and a password to create
an account. You will receive a validation e-mail to the e-
mail address you specified. Follow the instructions in the
e-mail within 24 hours to validate your account. If not
validated within 24 hours, you will have to create your
account again. When the account has been created in
the app, you can pair the robotic lawnmower and your
First start-up sequence on page 22 .
mobile device. See
To get started with Husqvarna Fleet Services
Remote HMI on page 22 .
®
550
®
Connect on page
®
Connect app from AppStore
™
app, see
Installation - 21