Related Manuals for SATO SK-10S
Summary of Contents for SATO SK-10S
- Page 1 Instruction Manual No. 1731-00 Digital Salt Meter Model SK-10S No. 3 Nishi-Fukudacho, Kanda, Chiyodaku, Tokyo 101-0037 Japan URL: http://www.sksato.co.jp/english/ SK-1110...
- Page 2 Cautions before use A special treatment has been applied to the tip of the sensor. Never touch it with your bare hands. Be sure not to drop it or let it bump against the container. If the sensor is hit against a hard object or a strong impact is applied to it, its inner part could be damaged.
- Page 3 Name of Section Main body Probe Sensor protective tube Select key Measure key Change/OK key Power/Measure key (main body) Average key Sensor grip Setting up the salt meter 1. Open the battery cover at the back of the main unit by sliding it in the direction of the arrow. Connect the battery to the battery snap with the polarities (+/-) aligned correctly.
- Page 4 NB: If any other information appears at this point, it is likely that the sensing part is dirty. Wash the tip of the sensor and wipe it off with a clean cloth or the like, and then press the Power/Measure key again.
- Page 5 Displaying the gram equivalent (amount of solute) The unit is equipped with a function that automatically calculates the salt content from the salinity concentration in the solution. Automatic calculation uses the predetermined solvent amount. Since the amount of solvent is retained even after the unit is turned off, it is useful to enter the usual amount into the unit.
- Page 6 It is recommended not to wipe the sensor after washing; leave it to air dry. After use, protect the sensing part by covering it with Sensor protective tube. Specifications Cat. No. No. 1731-00 Digital Salt Meter Model SK-10S Measuring factor Salinity concentration Detecting method Electric resistance type Measuring range 0.1 to 10.0% (at -5 to 70℃)
Need help?
Do you have a question about the SK-10S and is the answer not in the manual?
Questions and answers