SAMSUNG MULTI – CLIP MANUAL
1.OPERATING WITH SAMSUNG MULTI-CLIP
Insert clip to the phone.
Cell should be switched on or swithed off (it depends on phone model). In most
cases it should be switched off.
Clip is power supplied from the phone, but there is no problem to use 9v battery
power supply (construction of the clip allows that).
After choosing adequate model press "unlock" button.
THIS OPTION IS AVAILABLE TO MODELS: A200/T100-T700/R200-R225/N100-
ALL YOU NEED TO DO IS PRESS "REPAIR" BUTTON. THERE's NO NEED TO
CHOOSE MODEL OF THE PHONE.
1. FUNCTION OF THE BUTTONS.