General Information; Introduction; Equipment Description; Technical Characteristic - Honeywell BendixKing KN 62A Installation Manual

BENDIX/KING
1.1

INTRODUCTION

This manual contains information relative to the physical, mechanical, and electrical characteris-
tics and installation procedures for the KN 62/62A/64 DME. The KN 64 has lower output power
than the KN 62/62A. The KN 64 is not TSO'ed.
1.2

EQUIPMENT DESCRIPTION

The KN 62/62A/64 is a panel mounted, 200 channel DME employing the latest state of the art sol-
id-state transmitter and large scale integrated circuit (LSI) technology. All tuning is done electron-
ically using a single crystal, digital, frequency synthesizer. The unit has a gas discharge display
that simultaneously indicates range, speed, and time-to-station or range and frequency. An auto-
matic dimming circuit adjusts the brightness of the display to compensate for changes in ambient
light level.
Range, speed, and time-to-station are measured digitally, using two LSI
are employed in the digital frequency synthesizer and display circuitry.
The KN 62/62A/64 can be channeled internally using its own frequency selection knobs or exter-
nally from any of the common NAV receiver codes.
The KN 62/62A/64 is an extremely compact DME requiring only 1.3 inches of panel height. It can
be operated with any DC input from 11 to 33 volts. Power consumption is only 15 watts at any
input voltage; thus, forced air cooling is
1.3 TECHNICAL CHARACTERISTICS
SPECIFICATION
TSO COMPLIANCE (KN 62A only):
KA 60 Antenna:
KA 61 Antenna:
RTCA DO-160 Environmental
Categories
KN 62A:
KA 60:
RTCA DO-160D Environmental
Categories
KA 61:
CHANNELS:
ELECTRICAL:
Rev 7, November/2004
SECTION I

GENERAL INFORMATION

not
required.
CHARACTERISTIC
F.A.A. TSO C66a
FAA TSO C66a and TSO C74c
FAA TSO C66c, C74c, C112, C118, C147
/A1B1/A/PKS/XXXXXXZBBBA
/D2/A/JY/XXXXXXXXXXX
[D2X]ACB[SCMYL,RG]XRFXX-
SXXXXXXX[XXXX][2A]AX
200 channels
A. All solid state transmitter
B. Electronically tuned by single crystal, digital,
frequency synthesizer
C. Range, speed, and time-to-station measured
digitally, using large scale integrated circuits
00144I06.TDC
KN 62/62A/64
,
s. Two other LSI circuits
Page 1-1