HP Ink Tank 110 series User Manual page 13

Table of Contents

Advertisement

Error light, Warning light, and Resume light
Printhead lights and Error light are off.
Warning light and Resume light are blinking quickly.
Cause
One of the following might have occurred:
The printer receives a printing job, and detects that there
is no paper in the input tray.
There is a paper jam.
Warning light is off.
Printhead lights, Error light, and Resume light are blinking quickly.
Cause
The carriage inside the printer has stalled.
Error light is off.
Warning light is blinking.
Other control panel lights remain unchanged.
ENWW
Solution
Load paper, and then press the Resume button (
continue printing.
For information about how to load paper, see
on page
11.
Clear the jam, and then press the Resume button (
to continue printing.
For more information, see
on page
45.
Solution
Open the front door and the printhead access door, and make
sure the printhead latch is properly closed and the print
carriage is not obstructed. If needed, slide the print carriage to
the right side of the printer. Close the printhead access door
and the front door, and then press the Resume button (
to continue printing. See
Jams and paper-feed issues
on page 45
for more information.
NOTICE:
After you have set up the printer, do not open the
printhead latch unless instructed to do so.
) to
Load media
)
Jams and paper-feed issues
)
Status lights
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents