AMC2 enclosure - 1 DIN
rail
3
Connection of the Devices
Figure 3.1: Connections in the Enclosure
Connect the readers and other peripheral devices as described
in the AMC Installation manuals and in the manuals of the
peripheral devices. Route the device cables through the knock-
outs in the top and right side wall of the housing, or through the
rear of the housing.
Notice!
Make sure that the mains adapter has the correct output
voltage (12V or 24V).
When installing the enclosure, make sure to provide an
appropriate disconnect device for the mains supply voltage.
Removing a fuse or simply pulling the plug is not an appropriate
means to disconnect the device!
Bosch Access Systems GmbH
Connection of the Devices | en
2018-04 | AEC-AMC2-UL1 |
9