Table of Contents
Advertisement
• Gateway address: (WAP only) enter the gateway address of the proxy server.
• Proxy address: (HTTP only) set the proxy server address and port.
• Linger Time (Sec.): set a time period (in seconds) after which the network is
disconnected if there has been no new data traffic in that time.
• Advanced Settings: allows you to configure some of the IP-specific
information: Static IP, Static DNS, Server information, and Traffic Class.
- Static IP: specify if you want to manually enter an IP address. If you want the IP
address to be automatically assigned by the server, remove the check mark.
- Local phone IP: enter the IP address obtained from the network operator, if you
checked the Static IP option.
- Static DNS: specify if you want to manually enter the Domain Name Server
(DNS) address. If you want the address to be automatically assigned by the
server, remove the check mark.
- Server 1/Server 2: enter the Domain Name Server (DNS) addresses.
- Traffic Class: select the traffic class.
Note: The WAP settings may vary depending on the service provider.
153
Advertisement
Table of Contents
