Product Feature; Additional Information - D-Link DVG-6004S Quick Installation Manual

R egister to the SIP Proxy Server by clicking Enable support of SIP Proxy Server.
Enter Proxy Server IP/Domain and Port.
The Outbound Proxy Support is optional. To register, please click on the
Outbound Proxy Support check box and enter Outbound Proxy IP/Domain
and Port in it.
Registration by phone line: enter Number, User ID/Account and Password
supplied by your ITSP. Click on the Register check box to register to Proxy Server
Click Next.
Setup is nished. Check the summary of your settings. To make new settings
e ective, you must click on the Restart button to reboot the DVG-6004S.
Click Restart.

Additional Information

You can refer to the user manual or visit
http://support.dlink.com
support.

Product Feature

One 10/100/1000 Mbps auto-negotiation, auto-crossover RJ-45 Ethernet port
Support static IP, PPPoE and DHCP address assignment and dynamic DNS (DDNS)
QoS: IP TOS (Type of Services) and Di Serv (Di erentiated Services) for both SIP signaling and RTP
NAT Traversal: STUN and Outbound Proxy
NTP (Network Time Protocol RFC 1305)
Time Zone Support
MAC Address Clone
RTP Packet Summary: packet sent, packet received, packet loss for voice quality analysis
T wo 10/100/1000 Mbps auto-negotiation, auto-crossover RJ-45 Ethernet ports
Supports router and bridge mode
DHCP server
SIP (RFC3261) compatible
Voice codecs: G.711 a/u law, G.726, G.729A, G.723.1
CNG (Comfort Noise Generation)
VAD (Voice Activity Detection)
G.165/G.168 echo cancellation
Adjustable Jitter Bu er and programmable Gain Control
In-Band DTMF, Out-Of-Band DTMF relay (RFC2833, SIP INFO)
Multiple SIP Proxy server entries with failover mechanism
Polarity reversal generation
T.30 (G.III) / Real time T.38 / Secured T.38 FAX relay
DTMF, FSK (Bellcore, ETSI and NTT) Caller ID Detection
Support Caller ID Restriction (CLIR)
Digit Map for dial plan
Speed Dial
Local phone book for peer-to-peer calling
E.164 Numbering and ENUM support
Hot-Line, Warm-Line support
Single Number / Account for multiple ports
Call features
Call Forward - Unconditional, Busy
Analogue interface
Connector: RJ-11
Con guration methods:
- Web
- IVR
- Telnet
Status reports:
- Port status
- Registration status
- Ping tests
- Hardware / software information
Firmware Upgrade through TFTP, FTP and HTTP server
Con guration Backup/Restore
Reset button (with restore factory default function)
Front Panel LED: Power, Alarm, Register, WAN, LAN and FXO port
online for more