Preset Speeds - Toshiba TOSVERT-130G2+ Operation Manual

8.4.3 Jog (Cont'd)
Terminal Connections
JOG
ST
(SS2)
ON ON OFF
ON ON OFF
ON ON
ON ON
8.4.4

7 Preset Speeds

For remote operation the following preset functions, terminals, and chart must
be used. Follow the same procedure as in section 8.3.4 for setting the preset
speed frequencies.
Terminal Connections Required for
Remote Preset Speeds
Terminals SS2 and SS3 have dual functions, however only one function can be
used at a time. Enabling the other functions (JOG, AD2) disables functions
SS2 and SS3, thus limiting the number of accessable preset frequencies.
The following chart identifies the functions of the 3 terminals (SS1, SS2, SS3)
and their corresponding accessable preset frequencies.
Setting selection
of parameter1.tb AD2/SS3-CC JOG/SS2-CC
OFF
OFF
0 OFF
(SS2) OFF
(SS3) ON
ON
ON
ON
OFF
1 OFF
(JOG) OFF
(SS3) ON
ON
2 *ON/OFF
(SS2) *ON/OFF
(AD2) *ON/OFF
*ON/OFF
3 *ON/OFF
(JOG) *ON/OFF
(AD2) *ON/OFF
Note:
When "1.tb" (accessible by TB KEY #8) is set to 2 or 3 the AD2 function is activated. This
function enables the user to remotely switch between the ACC/DEC patterns 1 and 2, provided
SEL2=0. If SEL2=1 then the only pattern available is given by ACC2, DEC2, Pt.2. With AD2-CC
terminals shorted (ON) all ACC/DEC patterns are run using the settings of the ACC2, DEC2, Pt.2
parameters.
Terminal inputs and actions
F R
OFF
ON
ON OFF
ON ON
Terminal Inputs
Terminal Selection 1.tb
SS1-CC
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
ON OFF
OFF ON
OFF OFF
OFF ON
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
ON OFF
OFF ON
Jogging Stop
Reverse Jogging Run
Forward Jogging Run
Reverse Jogging Run
ST F R CC
F
ST R
Frequency setting
via terminals
Operating frequency set via PP, IV, RR terminals
1st operating frequency
2nd operating frequency
3rd operating frequency
4th operating frequency
5th operating frequency
6th operating frequency
7th operating frequency
Operating frequency set via PP, IV, RR terminals
Jogging
1st operating frequency
2nd operating frequency
3rd operating frequency
Operating frequency set via PP, IV, RR terminals
1st operating frequency
2nd operating frequency
3rd operating frequency
Operating frequency set via PP, IV, RR terminals
Jogging
1st operating frequency
8 - 15
TOSHIBA
Action
AD2
JOG
SS1
(SS3)
(SS2)
SS1 SS2 SS3