Lorex Vantage LDC6011PK2 Quick Start Manual

Contents
• Indoor IR dome camera*
• Mounting screws x 3*
• 60ft BNC / power extension cable*
• BNC female / RCA male adapter**
• Power adapter*
*Model LDC6011PK2 is a 2-pack that includes two of the listed items.
** Only included with single-camera configurations.
WARNING - A REGULATED UL / CSA APPROVED power supply is
REQUIRED for use with this camera. Use of a non-regulated, non-conforming
power supply can damage this product and voids the warranty.
Features
• Super resolution with enhanced optics delivering crystal clear
video at 600TV lines of resolution
• BrightNight viewing with enhanced low-light image sensor
• Close-up recognition at night with auto-light compensation
prevents wash-out effect
• Anti-glare feature ensures clear images under strong lighting
conditions
• Accurate colors with Lorex's automatic light filtering technology
• Night vision up to 50ft (15m) away in total darkness*
• See more with 3.6mm wide angle viewing lens (78° FOV)**
Disclaimers:
* Infrared illumination range under ideal conditions. Actual range and clarity may vary
depending on scene / object reflection and camera application.
** Field of View, diagonal
Warning/Caution
• Read this guide carefully and keep it for future reference
• Follow all instructions for safe use of the product and handle
with care
• Use the camera within given temperature, humidity and voltage
levels noted in Camera Specifications
• Do not disassemble the camera
• Do not point the camera directly towards the sun or a source of
intense light
• Use only the supplied regulated power supply. Use of a non-
regulated, non-conforming power supply can damage this
product and voids the warranty
• Periodic cleaning may be required. Use a damp cloth only. Do
not use harsh cleaners or aerosol cleaners.
• The supplied extension cable is rated for surface mounting only
• Cables for in-wall / floor-to-floor installations are sold separately

Installation Tips

• This camera is for indoor use only
• Point the camera where there is the least amount of obstructions
• Install the camera in a location that is difficult for vandals to
reach
• Secure cabling so that it is not exposed or easily cut
ATTENTION - This camera includes an Auto Mechanical IR Cut Filter. When
the camera changes between Day/Night viewing modes, an audible clicking
noise may be heard from the camera. This clicking is normal, and indicates
that the camera filter is working.

Camera Specifications

Image Sensor 1/3" Color Image Sensor
Video Format NTSC
Effective Pixels H: 720 V: 480
Resolution 600 TV Lines
Scan System 2:1 Interlace
Sync System Internal
S / N Ratio 48dB (AGC Off)
Iris AES
AES Shutter Speed 1/60 ~ 1/25,000 sec.
Min. Illumination 0.1 Lux without IR LED
0 Lux with IR LED
Video Output Composite 1.0Vpp @ 75ohm
Lens / Lens Type 3.6mm F2.0 / Fixed
FOV (Diagonal) 78°
Termination BNC Type
IR LED Qty. / Type 10 pieces / 850nm
Night Vision Range* 50ft / 15m
Power Requirement 12V DC ±10%
Power Consumption Max. 240mA (w / IR)
Operating Temp. Range 14° ~ 122°F / –10° ~ 50°C
Operating Humidity Range < 90% RH
Environmental Rating** Indoor use only
Weight (including stand) 0.4lbs / 0.2kg
* IR Illumination Range under ideal conditions. Objects at or beyond this range may be partially or
completely obscured, depending on the camera application.
** Not for outdoor use.
Dimensions
92mm / 3.6"
63mm / 2.4"
FOR SUPPORT AND INFORMATION,
VISIT WWW.LOREXTECHNOLOGY.COM
Product Information
User Manuals
Quick Start Guides
Copyright © 2012 Lorex Technologies Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product
design, specifications and prices, without notice and without incurring any obligation. E&OE

Quick Start Guide

English Version 2.0
92mm
/ 3.6"
Specification Sheets
Software Upgrades
Firmware Upgrades
SUPER RESOLUTION INDOOR
NIGHT VISION DOME CAMERA
LDC6011 SERIES