Adding Pauses; Storing Numbers After A Call - Samsung Gleam User Manual

An UPDATE EXISTING pop-up screen with a selection list of entry types
10.
displays. Use the up or down navigation keys to highlight the desired type
then press
your Contacts.
Method 3

Storing Numbers After a Call

Once you've finished a call, you can store the number of the caller to your Contact
List.
Note: If the call was incoming and Caller ID information was unavailable, then the store option is also
unavailable.
After you press
1.
phone number appears in the display.
Press the right soft key
2.
New Contact, or Update Existing.
Follow the on-screen prompts to designate other information.
3.

Adding Pauses

Calls to automated systems often require a password or account number. Instead of
manually entering numbers each time, store the numbers to your Contacts along
with special characters called pauses.
From the main screen, enter the number.
1.
Press the right soft key
2.
highlight Add Wait (A "W" appears in the display.) or Add Pause (A "P"
appears in the display.) and press
• Add Wait: A hard pause stops the calling sequence until further input from you.
• Add Pause: A two-second pause stops the calling sequence for two seconds
and then automatically sends the remaining digits.
When you're finished entering information for the entry, press the left soft
3.
key
Continue with Step 2, Method 2 of Adding a number to a new or existing
4.
Contact from the main screen.
Note: Entering multiple Add Pauses extends the length of a pause. For example, two consecutive Add
Pauses cause a total pause time of four seconds. Keep in mind pauses count as digits towards the
48-digit maximum.
O . The number is added to the selected entry and saved to
K
to end your call, the call time, length of call and
END END
SAVE.
Save. You're prompted to select Add
Options use the navigation key to
O
.
K
Understanding Your Contacts
Adding Pauses
56