HermanMiller Distil Table Installation Instructions

HermanMiller
The Collection
Distil Table (TB100) Installation
Instructions
For more information about our products and services or to see a list of dealers, please visit us at
www.hermanmiller.com/product-instructions or call 888 - 443 - 4357.
© 2015 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. 1BDXJG - C.
How to assemble
your table.
Safety Instructions & Warning
• Read all instructions before using products
• Failure to fully tighten screws may cause injury
• Sitting or standing on product may cause risk or personal injury
• Periodically check fasteners to ensure tightness
• The right is reserved to make changes at any time without notice

Tools Required

4mm Allen Wrench

Step 1

1.1
Locate the Desk Top upside down in the box for leg assembly.
Using an allen wrench, Install the 4 legs. Place legs labeled 'A' in slots labeled 'A'.
Place legs labeled 'B' in slots labeled 'B'.
Leg (LH)
Leg (RH)
Desk Top
Connector Bolt
HermanMiller Distil Table
Leg (LH)
Leg (RH)
Parts Included
DeskTop Qty 1
Leg (LH) Qty 2 Leg (RH) Qty 2

Step 2

2.1
Place the table in upright position.
1
Connector Bolt Qty 8
Assembly Instructions