Entering Configuring Data With Com 95F - Siemens SIMATIC S5-95F Manual

Application
17.5

Entering Configuring Data with COM 95F

Once the blocks have been entered, you must generate data block DB1 with COM 95F. DB1
contains the configuring data for the S5-95F. To generate this block, proceed as follows:
Call COM 95F on the programmer
In the DEFAULTS form, enter the name of the program file containing the user program for the
S5-95F
Confirm with <F6>
Enter the configuring target with <F2> "FD configuring"
Configuring the Onboard Inputs for the Short-Circuit Test
Press the following function keys in succession:
- <F2> "IO config"
- <F1> "Onboard"
- <F1> "DI"
Result: The "Configuring the onboard DIs (DI 32/33)" is displayed on the programmer screen:
Configuring the onboard DIs (DI 32/33)
Bits -->
DI byte 32
DI byte 33
Digital input 32.0
Signal group
OB3 interrupt
Discrepancy time
Short-circuit test DQ (Y..33.0..33.3, 34.0..34.3/N): Yes
F1 F2 F2
CHANGE
Figure 17-4. Sample "Configuring the Onboard DIs (DI 32/33)" Screen Form
17-8
0 1 2 3
red red red red
red red red red
(Y/N): No
F3 F4
SELECT DEFAULT
VALUES
4 5 6
red red red
red red red
(0 ... 31): 5
(short/average) Average 5ms
F5 F5 F6
COM 95 F / PEC22
7
red
red
33.0
F7 F8
RETURN
EWA 4NEB 812 6210-02
S5-95F