Table of Contents
Advertisement
LGE CDMA Fixed Wireless Phone
3. Basic Operation
3.1 Making a Call
You can make a call as follows.
1.
Pick up the handset or press
2.
Listen for dial tone.
3.
Enter the phone number with area code if needed.
4.
Wait for the Auto Time-out.
5.
The call is connected and you may start conversation.
6.
To disconnect the call, replace the handset or press
When the user presses the 'Dial/Flash' button after dialing any desired number, if the user pick up
the handset or press the speaker phone button, the phone makes a call immediately.
3.2 3 way call
You can start tripartite conversation.
1.
Enter the phone number while talking over the phone.
2.
Press Dial/Flash button.
* This service should be registerd by Telecom Service Company.
3.3 Call waiting
While a call is in progress, you may hear two beeps indicating another incoming call. When call
waiting is enabled, you may put the active call on hold while you answer the other incoming call.
1.
Press Clear or End button, Call Waiting window is gone. Or
2.
Press Dial/Flash button, you may start conversation with called number.
3.
Re-press Dial/Flash button, you may start conversation with previous number.
3.4 Volume Control
1.
Press left/right button of navigation while in a call, adjust receiver volume.
2.
Press up/down button of navigation while in a call, adjust MIC volume.
button.
21
LSP-350
button.
Advertisement
Table of Contents
