Samsung 010505D5 User Manual page 258

Samsung cell phone user manual for sprint pcs
Table of Contents

Advertisement

To check the ports used for infrared communication:
In the Windows task bar, click "Start", choose "Settings",
1.
and then "Control Panel".
Double-click "Infrared".
2.
Click the "Options" tab.
3.
Select "Enable infrared communication".
4.
The COM port displayed in the drop-down box is the
Note:
port where your infrared device is attached. It should be
different from any port used by the HotSync Manager.
Make a note of which port is listed as "providing
5.
application support." You need this information to
configure the HotSync Manager for infrared
communication.
Deselect any other check boxes in the "Options" tab.
6.
Click "Apply" and "OK" to exit.
7.
Configuring HotSync Manager for infrared
communication
Next, you need to go to the HotSync Manager and specify the
simulated port used for infrared communication. To configure
HotSync Manager for infrared communication:
Click the HotSync Manager icon in the Windows system
1.
tray.
Make sure "Local" is checked on the menu.
2.
Select "Setup".
3.
Click the "Local" tab.
4.
In the Serial Port drop-down box, select the COM port that
5.
was given as the simulated port in the "Options" tab of the
Infrared Monitor.
Click "OK".
6.
The HotSync Manager is now communicating with the
Note:
simulated port defined for infrared communication. This
HotSync® Operations
257

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sph-i300ss

Table of Contents