Changing The Flash Time; Changing The Pause Time - IBM -3920 Installation And Operating Manual

Changing the Flash Time

1. Press and hold the Mute key on the left side of the
handset to enter the programming menu.
2. Press M until you reach the Flash Time programming
Talk
option.
1 2
ABC 3
DEF
4 5 6
GHI JKL MNO
7
PQRS 8 9
TUV WXYZ
*
0 #
3. Press T/OK.
Flash Monitor Redial
4. Press L or M to select between 700, 660, 620, 600,
580, 400, 270, or 100 ms.
5. Press T/OK.
6. Press B/Exit to return to the idle screen.
Note: The standard and default flash time setting is 600msec. This is the
setting you should use to access standard telephone services such as
call waiting. This setting is adjustable to allow for PBX and other special
uses.
SETTINGS
>Username
Ringer Level
Ring Tone
OK Exit
>Flash Time
Pause Time
Tone/Pulse Mode
OK Exit
Flash Time
600 ms
OK Exit
>Pause Time
Tone/Pulse Mode
Line In Use Chk
OK Exit
23

Changing the Pause Time

1. Press and hold the Mute key on the left side of the
handset to enter the programming menu.
2. Press M until you reach the Pause Time programming
Talk
option.
1
2 3
ABC DEF
4 5
GHI JKL 6
MNO
7 8 9
PQRS TUV WXYZ
*
0 #
3. Press T/OK.
Flash Monitor
Redial
4. Press L or M to select between 01-10 seconds.
5. Press T/OK.
6. Press B/Exit to return to the idle screen.
SETTINGS
>Username
Ringer Level
Ring Tone
OK Exit
>Pause Time
Tone/Pulse Mode
Line In Use Chk
OK Exit
Pause Time
04 Seconds
OK Exit
>Tone/Pulse Mode
Line In Use Chk
Factory Default
OK Exit
24