Setting The Area Code; Turning Key Beeps On/Off - IBM -3920 Installation And Operating Manual

Setting the Area Code

1. Press and hold the Mute key on the left side of the
handset to enter the programming menu.
2. Press M until you reach the Area Code programming
Talk
option.
1
2 3
ABC DEF
4 5
GHI JKL 6
MNO
7 8 9
PQRS TUV WXYZ
*
0 #
3. Press T/OK.
Flash Monitor Redial
4. If you only use 7 digits to dial locally (555-1212), use
the dial pad to enter your 3-digit home area code and
then press T/OK. You may now press B/Exit
to return to the idle screen.
5. If you use 10-digit dialing in your area (555-555-1212),
press M to enter the first local area code, skipping the
home area code programming.
6. Use the dial pad to enter a 3-digit local area code.
7. Press M to enter the next local area code. Repeat the
same process for all the other local area codes. You
can program up to 8 area codes, but you do not have
to program all of them.
8. When you are done entering area codes, press
T/OK.
9. Press B/Exit to return to the idle screen.
SETTINGS
>Username
Ringer Level
Ring Tone
OK Exit
>Area Code
Key Beeps
Flash Time
OK Exit
Home Area Code
OK Exit
Area Code #1
OK Exit
>Key Beeps
Flash Time
Pause Time
OK Exit
21

Turning Key Beeps On/Off

1. Press and hold the Mute key on the left side of the
handset to enter the programming menu.
2. Press M until you reach the Key Beeps programming
Talk
option.
1 2
ABC 3
DEF
4 5 6
GHI JKL MNO
7
PQRS 8 9
TUV WXYZ
*
0 #
3. Press T/OK.
Flash Monitor Redial
4. Press L or M to toggle between Enable and Disable.
5. Press T/OK.
6. Press B/Exit to return to the idle screen.
SETTINGS
>Username
Ringer Level
Ring Tone
OK Exit
>Key Beeps
Flash Time
Pause Time
OK Exit
Key Beeps
Enable
OK Exit
>Flash Time
Pause Time
Tone/Pulse Mode
OK Exit
22