Samsung VP-W80 Owner's Instruction Book page 52

ENGLISH
Playing back the Tape
Note:
VP-W80U/W80/W87/W87D feature a monaural
audio system.
If your TV or VCR are stereo, connect the audio
cable to the input marked "L" of the TV or VCR.
You can use the S-VIDEO cable to obtain better
quality pictures if you have the S-VIDEO connector
on your TV.
Playback
1. Use the TV/VIDEO button to select VIDEO on your TV.
2. Connect a power source (battery or AC Power
Adapter) to the camcorder.
Set the power switch to PLAYER
mode.
3. Insert the tape you want to watch.
Make sure that STOP is
displayed.
4. Press the (PLAY/STILL)
button.
The recorded pictures should
appear on the TV after 2 to
3 seconds.
Press (STOP) to stop playing.
If the tape reaches its end during
playback, the tape will rewind
automatically.
Notes:
This camcorder does not support LP recording
and playback.
The playback system (Hi8/8mm) is selected
automatically, depending on the tape format.
VP-W80/W87/W87D can playback both Hi8
and 8mm.
52
Pfiehrávání záznamu
PLAYER
PLAY/STILL
CZECH