Samsung SHC-735 User Manual page 20

Supreme resolution wdr camera
Hide thumbs Also See for SHC-735:
Table of Contents

Advertisement

How to Use the Camera
Enter a title, move the cursor to 'POS' and press the SET button. The entered
title appears on the screen. Select the position to display the title on the
screen by using the 4 direction buttons and press the SET button. When the
position is determined, select 'END' and press the SET button to return to the
SPECIAL menu.
FRONT DOOR
to Locate, then SET
to Locate, then SET
to Locate, then SET
SYNC : In areas where the supply is at 60Hz, you can
synchronize the output phase of multiple
cameras using the power synchronization
function (Line-Lock) without using a
synchronization signal generator.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
• Press the SET button.
• You can select a desired phase between 0 and 359.
Notes
• When using AC power at 60Hz frequency, you can use the L/L type synchronization.
• When the power is DC 12V, the SYNC. menu is fixed to the 'INT' mode.
MOTION DET:
If you connect an alarm device to this camera, you
can monitor activity more efficiently, because a
signal is generated by the camera whenever
motion is detected. The motion detection signal is
output through the MD OUT port.
38
COLOR CCD CAMERA
User's Manual
When the SPECIAL menu screen is displayed, press the Up and Down buttons
so that the arrow indicates MOTION DET .
Set up the mode using the 4 direction buttons.
- SENSITIVITY : You can select up to 8 MD areas.When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- FILL
SET : Fills in a selected MD area. Fills in a selected MD area. The color of filling is
sequentially selected as brown, orange, blue, cyan, yellowish green, yellow
and red.
- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL
menu.
Notes
• MD areas show only MOTION DET menu. Therefore, MD areas don't display on the
monitor screen.
PRIVACY : Hide an area you want to hide on the
screen.
When the SPECIAL menu screen is displayed,
press the Up and Down buttons so that the
arrow indicates 'PRIVACY'.
Set up the mode using the 4 direction buttons.
- AREA SEL : You can select up to 8 MD areas.
- AREA MODE :
Determines whether to use the area selected in
the AREA SEL, and the size and position of the
area.
39
COLOR CCD CAMERA
User's Manual

Advertisement

Table of Contents
loading

Table of Contents